FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Ford F-150 Fourteenth Generation (2021-present) - Ford F-150
Home/Cars/Ford/F-150/Fourteenth Generation (2021-present)/how to reset the maintenance light on my Ford F-150 Fourteenth Generation (2021-present)

how to reset the maintenance light on my Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
302 words

Problem Statement

Learn how to reset the maintenance light on your 2021-present Ford F-150. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or has the parking brake engaged to prevent unintended movement.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Potential reminder for oil change or service interval
  • •No other warning lights present
  • •Engine running normally without unusual noises or performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Access the Instrument Cluster
  • Turn the ignition key to the "On" position (do not start the engine).
  • Locate the gas pedal.
3. Reset the Maintenance Light
  • Fully press the gas pedal three times within 10 seconds.
  • Turn the ignition off, then turn it back to the "On" position.
  • Check the dashboard to confirm that the maintenance light has turned off.