FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the rearview camera not working in my Ford F-150 Fourteenth Generation (2021-present) - Ford F-150
Home/Cars/Ford/F-150/Fourteenth Generation (2021-present)/how to fix the rearview camera not working in my Ford F-150 Fourteenth Generation (2021-present)

how to fix the rearview camera not working in my Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
491 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in Ford F-150 (2021-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to avoid short circuits.

Symptoms

  • •Rearview camera display is blank or shows a black screen
  • •Error message on the infotainment screen indicating camera malfunction
  • •Camera feed flickers or shows distorted images
  • •No audible alerts when reversing
  • •Backup assist features are disabled

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Cleaning cloth
  • •Flat-head screwdriver

Parts Required

  • •Replacement rearview camera (if necessary)
  • •Replacement fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: OBD-II scanner, socket set, multimeter, cleaning cloth, and a flat-head screwdriver.
  • Ensure the vehicle is parked on a level surface and the ignition is turned off before starting repairs.
2. Clean the Camera Lens
  • Use the cleaning cloth to gently wipe the rearview camera lens.
  • Inspect for any damage to the lens and replace if necessary.
3. Check and Replace Fuses
  • Locate the fuse box (usually under the dash or in the engine compartment).
  • Identify the fuse related to the rearview camera (refer to the fuse diagram located on the fuse box cover).
  • If blown, replace with a fuse of the same amperage (usually 10A or 15A).
4. Inspect Wiring and Connectors
  • Remove the rear tailgate trim panel using a flat-head screwdriver.
  • Visually inspect the wiring harness and connectors for any signs of wear or corrosion.
  • Ensure all connections are secure and reconnect any loose wires.
5. Test the Camera System
  • Reconnect the battery if it was disconnected during repairs.
  • Start the vehicle and engage reverse to check if the camera feed appears on the display.
  • If the issue persists, consider replacing the camera unit.