how to fix the rearview camera not working in Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

532 words

Problem Statement

Learn how to diagnose and fix the rearview camera not working in Ford F-150 (2021-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits.
•Ensure the vehicle is in park or neutral and the engine is off when accessing electrical components.

Symptoms

•Rearview camera display is blank or black
•No image appears on the infotainment screen
•Camera error message displayed on the screen
•Guidelines for parking not visible
•Intermittent camera functionality

Diagnostic Steps

1
Inspect the camera lens for any obstructions or dirt.
2
Check the vehicle's fuse for the rearview camera system using the owner's manual for fuse location and specifications.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the connections at the rearview camera and the infotainment system for any loose or damaged wires.
5
Test the camera using a multimeter to ensure it is receiving power.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Fuse puller or needle-nose pliers
•Trim removal tool
•Cleaning cloth

Parts Required

•Replacement rearview camera (if faulty)
•Replacement fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for any obstructions or dirt.
2
Check the vehicle's fuse for the rearview camera system using the owner's manual for fuse location and specifications.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the connections at the rearview camera and the infotainment system for any loose or damaged wires.
5
Test the camera using a multimeter to ensure it is receiving power.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety during repairs.

2. Inspect Camera and Connections

Tools Required: Socket set, multimeter, cleaning cloth.
Clean the camera lens gently with a microfiber cloth to remove any dirt or debris.
Inspect the wiring harness connected to the rearview camera for damage or corrosion.
Ensure all connectors are firmly attached and free from rust or debris.

3. Replace the Fuse (if necessary)

Tools Required: Fuse puller or needle-nose pliers.
Locate the fuse box (usually under the dashboard or in the engine compartment) as per the owner's manual.
Identify the fuse associated with the rearview camera system.
Remove the fuse and inspect it; if blown, replace it with a new fuse of the same amperage.

4. Replace Rearview Camera (if necessary)

Tools Required: Socket set, trim removal tool.
Remove the mounting screws holding the rearview camera in place.
Disconnect the wiring harness from the camera.
Install the new camera by connecting the wiring harness and securing it with screws.

5. Reconnect Battery and Test

Reconnect the negative terminal of the battery.
Start the vehicle and shift into reverse to test the camera functionality.