how do I reset the oil change light on my Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

393 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2021-present) with this easy step-by-step guide. Keep your vehicle maintenance on track.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent any movement while performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Message indicating oil change required
•Engine oil pressure warning could be displayed
•Maintenance reminder notifications

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the gas pedal and the brake pedal.
3
Check the odometer display to ensure it is in the 'Trip' mode.
4
Turn the ignition off and then back to the 'On' position again.
5
Press the gas pedal three times within 10 seconds.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for resetting the oil change light.

Parts Required

•None required for resetting the oil change light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Ensure the vehicle is in the "On" position (without starting the engine).
Have the owner's manual handy for reference if needed.

2. Access the Oil Change Reset Feature

With the ignition in the "On" position, press the brake pedal to ensure the vehicle is ready for the reset process.
Confirm the odometer is set to "Trip" mode by pressing the "Trip" button on the instrument cluster.

3. Reset the Oil Change Light

Turn off the ignition completely.
Turn the ignition back to the "On" position without starting the engine.
Quickly press the gas pedal three times (within 10 seconds).
Watch for a confirmation message on the dashboard that indicates the oil change light has been reset.

4. Finalize the Reset

Turn off the ignition completely again.
Start the engine to verify that the oil change light is no longer illuminated.