how do I reset the oil change light on my Ford F-150?

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

348 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 with this step-by-step guide. Clear maintenance reminders easily and quickly.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

•Oil change light remains illuminated after maintenance
•Message indicating the need for an oil change
•Engine oil pressure warning may appear
•Maintenance reminder alerts in the driver information display

Diagnostic Steps

1
Ensure the vehicle is turned off and in park.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Observe the oil change light on the dashboard during the process.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in park.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Observe the oil change light on the dashboard during the process.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

1. Preparation

Gather the necessary tools:
- Ignition key (or key fob)

2. Access the Ignition

Insert the ignition key into the ignition switch or ensure the key fob is within range if the vehicle uses push-button start.

3. Reset the Oil Change Light

Turn the ignition key to the "On" position without starting the engine.
Quickly press the gas pedal three times within five seconds.
Watch the oil change light; it should blink or turn off, indicating the reset was successful.
Turn the ignition off completely after the light behavior confirms the reset.

4. Verify the Reset

Start the engine to ensure the oil change light is no longer illuminated.