how to reset the oil maintenance light on Ford F-150 14th Generation (2021-2024)

Ford F-150 14th Generation (2021-2024)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil maintenance light on Ford F-150 14th Generation (2021-2024) after an oil change. Step-by-step guide included.

Affected Component

Engine

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely parked before performing maintenance tasks.

Symptoms

•Oil maintenance light is illuminated on the dashboard
•Previous maintenance service completed
•Oil change has been performed

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition to the 'On' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Observe the oil maintenance light to see if it turns off.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition to the 'On' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Observe the oil maintenance light to see if it turns off.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface, and the engine is off.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "On" position or press the start button twice without engaging the brake pedal.
Ensure all dash lights illuminate.

3. Reset Maintenance Light

Quickly press the gas pedal three times within a five-second window.
Watch for the oil maintenance light to turn off.

4. Confirm Reset

Turn the ignition off completely.
Start the engine to ensure the oil maintenance light is no longer illuminated.