how to reset the maintenance light on my Ford F-150 14th Generation (2021-2024)?

Ford F-150 14th Generation (2021-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

438 words

Problem Statement

Learn how to reset the maintenance light on your 2021-2024 Ford F-150. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park with the parking brake engaged during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Message displayed indicating service is due
•Vehicle owner has completed required maintenance tasks

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is turned off.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal for push-button start vehicles.
3
Locate the gas pedal and ensure it is not pressed.
4
Access the vehicle settings through the instrument cluster display using the steering wheel controls.
5
Navigate to the 'Settings' menu and select 'Oil Life Reset' or 'Maintenance Reset' option.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the maintenance light.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is turned off.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal for push-button start vehicles.
3
Locate the gas pedal and ensure it is not pressed.
4
Access the vehicle settings through the instrument cluster display using the steering wheel controls.
5
Navigate to the 'Settings' menu and select 'Oil Life Reset' or 'Maintenance Reset' option.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Have the owner's manual on hand for reference if needed.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "On" position without starting the engine.
For push-button start, press the start button without pressing the brake pedal.

Use the steering wheel controls to navigate the instrument cluster display.
Press the "Menu" button on the left side of the steering wheel to access the settings.

4. Reset Maintenance Light

Scroll through the menu until you find "Settings" or "Vehicle Settings."
Select "Oil Life Reset" or "Maintenance Reset" depending on your system.
Confirm the reset by following the prompts on the screen (usually by pressing "OK" or "Confirm").

5. Turn Off Ignition

Turn the ignition off and then back on to verify that the maintenance light has been reset.