how to fix P0301 code in my Ford F-150 14th Generation (2021-2024)

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Disconnect the negative battery cable to ensure safety while working on the ignition system.
• Allow the engine to cool down before proceeding.

2. Inspect and Replace Spark Plug

• Remove the engine cover if applicable.
• Locate cylinder 1 spark plug, typically near the front of the engine.
• Use a socket set to remove the spark plug and inspect for wear, carbon buildup, or damage.
• Replace with a new spark plug that meets OEM specifications (usually Motorcraft SP-534).
• Torque the new spark plug to the manufacturer's specifications (usually around 13-15 lb-ft).

3. Inspect and Replace Ignition Coil

• Disconnect the electrical connector from the ignition coil for cylinder 1.
• Remove the mounting bolts securing the ignition coil to the valve cover.
• Replace with a new ignition coil that meets OEM specifications (usually Motorcraft DG-508).
• Reinstall the ignition coil and reconnect the electrical connector.

4. Inspect and Test Fuel Injector

• Disconnect the fuel injector connector for cylinder 1.
• Use a noid light to check for injector pulse while cranking the engine.
• If no pulse is detected, further investigate the wiring or replace the fuel injector with an OEM equivalent if faulty.
• Reconnect the injector connector after testing.

5. Reassemble and Reconnect Battery

• Reinstall any engine covers or components removed during the repair.
• Reconnect the negative battery cable.
• Ensure all connections and bolts are secured.