FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Ford F-150 making a hissing noise when accelerating - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why is my Ford F-150 making a hissing noise when accelerating

why is my Ford F-150 making a hissing noise when accelerating

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
625 words

Problem Statement

Learn how to diagnose and fix hissing noise during acceleration in Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool completely before beginning any work

Symptoms

  • •Hissing noise when accelerating
  • •Possible loss of power during acceleration
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Pliers
  • •Torque wrench
  • •Throttle body cleaner
  • •Gasket scraper

Parts Required

  • •Replacement vacuum line
  • •Intake manifold gasket
  • •Exhaust manifold gaskets (if applicable)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials required for the repair.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to ensure safety while working.
2. Inspect and Replace Vacuum Lines
  • Tools Required: Pliers, replacement vacuum line.
  • Remove the damaged vacuum line:
    • Locate the hissing vacuum line during the visual inspection.
    • Use pliers to disconnect the line from the fittings.
  • Install the new vacuum line:
    • Cut the new line to the appropriate length if needed.
    • Connect the new line securely to the fittings.
3. Check and Repair Intake Manifold
  • Tools Required: Socket set, torque wrench, gasket scraper, new gasket.
  • Remove the intake manifold:
    • Disconnect any electrical connectors and hoses attached to the manifold.
    • Use a socket set to remove the manifold bolts.
    • Carefully lift the manifold off the engine.
  • Inspect the manifold for cracks:
    • Check for any visible damage or warping.
  • Replace the gasket:
    • Clean the mating surfaces with a gasket scraper.
    • Install a new gasket and torque the manifold bolts to the manufacturer's specifications (usually around 15-25 lb-ft but verify for your specific model).
4. Inspect and Clean Throttle Body
  • Tools Required: Throttle body cleaner, clean rags, socket set.
  • Remove the throttle body:
    • Disconnect the throttle position sensor and any other attached connectors.
    • Remove the bolts holding the throttle body in place using a socket set.
  • Clean the throttle body:
    • Spray throttle body cleaner onto a clean rag and wipe the inside of the throttle body to remove carbon buildup.
    • Reinstall the throttle body and reconnect all electrical connectors.
5. Check Exhaust System
  • Tools Required: Socket set.
  • Inspect the exhaust manifold and gaskets:
    • Check for any visible cracks or signs of leaks.
  • Replace any damaged gaskets:
    • Remove the exhaust manifold if necessary.
    • Install new gaskets and tighten bolts to manufacturer’s torque specifications.