why is my Ford F-150 13th Generation (2015-2020) transmission slipping

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

490 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Ford F-150 13th Generation (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Transmission shifts erratically or unexpectedly
•Engine RPMs increase without a corresponding increase in vehicle speed
•Delayed engagement when shifting from park to drive/reverse
•Check engine light illuminated
•Fluid leaks under the vehicle
•Burning smell from the transmission area

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any transmission-related trouble codes.
2
Inspect transmission fluid level and condition; look for any burnt smell or discoloration.
3
Check for visible leaks around the transmission pan and seals.
4
Examine the transmission filter for clogs or damage.
5
Inspect the throttle position sensor and speed sensors for proper operation.
6
Test the transmission with a pressure gauge to assess hydraulic pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Funnel
•Drain pan
•Torque wrench

Parts Required

•Transmission fluid
•Transmission filter
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any transmission-related trouble codes.
2
Inspect transmission fluid level and condition; look for any burnt smell or discoloration.
3
Check for visible leaks around the transmission pan and seals.
4
Examine the transmission filter for clogs or damage.
5
Inspect the throttle position sensor and speed sensors for proper operation.
6
Test the transmission with a pressure gauge to assess hydraulic pressure.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and securely raised with jack stands.
Disconnect the battery.

2. Fluid Change

Tools Required: Socket set, funnel, drain pan.
Remove the transmission pan bolts using the socket set.
Carefully lower the transmission pan and drain the old fluid into the drain pan.
Inspect the pan for metal shavings or debris; clean if necessary.
Replace the transmission filter by removing it from its housing and installing the new filter.
Replace the transmission pan gasket with a new one.
Reinstall the transmission pan and torque the bolts to manufacturer specifications (typically around 10-12 lb-ft).

3. Fluid Refill

Using a funnel, refill the transmission with the appropriate type of transmission fluid (check owner's manual for specifications).
Start the engine and allow it to idle; shift through all gears while checking the fluid level.
Add fluid as necessary to reach the correct level.

4. Test Drive

Reconnect the battery.
Test drive the vehicle at various speeds and conditions to ensure proper shifting and no slipping.