FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 13th Generation (2015-2020) make a noise when I turn the steering wheel - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why does my Ford F-150 13th Generation (2015-2020) make a noise when I turn the steering wheel

why does my Ford F-150 13th Generation (2015-2020) make a noise when I turn the steering wheel

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
498 words

Problem Statement

Learn how to diagnose and fix steering noise in Ford F-150 13th Generation (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool down before inspecting the power steering system.

Symptoms

  • •Grinding or squeaking noise when turning the steering wheel
  • •Difficulty in steering or increased resistance
  • •Check steering fluid level warning light illuminated
  • •Steering wheel feels loose or has excessive play
  • •Noises change with the speed of the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Wrench set
  • •Pliers
  • •Power steering fluid
  • •Fluid catch container

Parts Required

  • •Power steering pump (if defective)
  • •Power steering fluid

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Ensure the vehicle is on a flat surface and securely lifted.
  • Disconnect the battery to prevent electrical shorts.
2. Check and Replace Power Steering Fluid
  • Locate the power steering reservoir.
  • Remove the cap and check fluid level; if low, top up with the manufacturer-recommended fluid.
  • If the fluid is dirty or contaminated, drain the old fluid from the reservoir and replace it.
3. Inspect and Replace Power Steering Pump (if necessary)
  • Locate the power steering pump.
  • Remove the drive belt by loosening the tensioner pulley.
  • Disconnect the power steering lines from the pump (use a container to catch any fluid).
  • Unbolt the pump from its mounting bracket and replace with a new pump.
  • Reconnect the power steering lines and drive belt, ensuring proper tension.
4. Inspect Steering Components
  • Check tie rod ends and ball joints for wear; replace if any play is detected.
  • Tighten any loose bolts in the steering column or related components.
  • If damaged parts are found, remove and replace them accordingly.
5. Reassemble and Test
  • Reconnect the battery.
  • Start the vehicle and check for leaks around the power steering pump and lines.
  • Test the steering to ensure noise has been eliminated and functionality restored.