FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 13th Generation (2015-2020) make a hissing noise when using AC - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why does my Ford F-150 13th Generation (2015-2020) make a hissing noise when using AC

why does my Ford F-150 13th Generation (2015-2020) make a hissing noise when using AC

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
538 words

Problem Statement

Learn how to diagnose and fix hissing noise when using AC in Ford F-150 2015-2020. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on the electrical components.
  • •Ensure the refrigerant recovery is performed by a certified technician to comply with environmental regulations.

Symptoms

  • •Hissing noise when AC is activated
  • •Decreased cooling efficiency
  • •Possible refrigerant leakage
  • •Increased humidity inside the vehicle
  • •AC compressor cycling on and off frequently

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •AC recovery machine
  • •AC manifold gauge set
  • •Mechanic's stethoscope
  • •Wrenches and sockets

Parts Required

  • •AC O-rings and seals
  • •AC compressor (if defective)
  • •AC hoses (if damaged)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the battery to prevent electrical shorts.
2. Recover Refrigerant
  • Tools Required: AC recovery machine
  • Connect the recovery machine to the AC service ports.
  • Recover the refrigerant according to the manufacturer's instructions to ensure it is safely stored.
3. Inspect and Replace Leaking Components
  • Components to Inspect:
    • AC hoses
    • O-rings and seals
    • AC compressor
  • If any leaks are detected, replace the damaged components as follows:
    • Disconnect AC lines with the appropriate wrenches.
    • Remove and replace O-rings with new ones (use the correct size and type).
    • Install the new AC compressor if it is found to be defective.
4. Recharge AC System
  • Tools Required: AC manifold gauge set, refrigerant
  • Connect the manifold gauge set to the AC service ports.
  • Recharge the system with the correct amount of refrigerant as per the manufacturer's specifications.
  • Ensure that the high and low-side pressures are within normal operating ranges.
5. Test the AC System
  • Reconnect the battery.
  • Start the vehicle and activate the AC system.
  • Monitor for any hissing noises and check the cooling efficiency.