FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 13th Generation (2015-2020) have a whining noise when turning - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why does my Ford F-150 13th Generation (2015-2020) have a whining noise when turning

why does my Ford F-150 13th Generation (2015-2020) have a whining noise when turning

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
543 words

Problem Statement

Learn how to diagnose and fix whining noise when turning in Ford F-150 13th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or replacing the power steering pump.

Symptoms

  • •Whining noise when turning the steering wheel
  • •Difficulty in steering, particularly at low speeds
  • •Fluid leaks under the vehicle
  • •Steering wheel vibration
  • •Increased steering effort required

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdriver set
  • •Fluid catch pan

Parts Required

  • •Power steering fluid
  • •Power steering pump (if needed)
  • •Power steering hoses (if damaged)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and engage the parking brake.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Screwdriver set
  • Fluid catch pan
2. Check and Replace Power Steering Fluid
  • Step 1: Locate the power steering reservoir.
  • Step 2: Remove the cap and check the fluid level; if low, add the correct type of power steering fluid as specified in the owner’s manual.
  • Step 3: If the fluid appears dirty or contaminated, drain the old fluid using a fluid catch pan.
  • Step 4: Refill with new power steering fluid and replace the cap.
3. Inspect and Replace Power Steering Pump (if necessary)
  • Step 1: Disconnect the negative battery cable.
  • Step 2: Remove the power steering pump drive belt using a socket set.
  • Step 3: Disconnect the power steering lines from the pump and cap the openings to prevent contamination.
  • Step 4: Unbolt the power steering pump from its mounting bracket and remove it.
  • Step 5: Install the new power steering pump in reverse order, ensuring all bolts are torqued to manufacturer specifications.
4. Inspect Steering Rack and Hoses
  • Step 1: Visually inspect the power steering hoses for signs of wear or leaks.
  • Step 2: Replace any damaged hoses as necessary.
  • Step 3: Check the steering rack for any cracks or leaks and replace it if damaged.