why does my Ford F-150 13th Generation (2015-2020) check engine light stay on after replacing the ga...

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0456, P0457

3 min read

450 words

Problem Statement

Learn how to diagnose and fix P0456, P0457 check engine light issues in Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0456, P0457

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting engine components.

Symptoms

•Check engine light remains illuminated
•Possible fuel odor near the vehicle
•Decreased fuel efficiency
•Engine roughness or stalling during acceleration
•Error codes related to the evaporative emissions system

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the new gas cap to ensure it is properly sealed and compatible with the vehicle model.
3
Check for any visible leaks in the fuel system and evaporative emissions system components.
4
Inspect the EVAP system for damaged hoses or connections.
5
Test the EVAP purge valve and canister for proper operation.
6
Clear the error codes and conduct a drive cycle to see if the check engine light reactivates.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdriver set
•Multimeter

Parts Required

•EVAP purge valve
•EVAP hoses
•EVAP canister (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the new gas cap to ensure it is properly sealed and compatible with the vehicle model.
3
Check for any visible leaks in the fuel system and evaporative emissions system components.
4
Inspect the EVAP system for damaged hoses or connections.
5
Test the EVAP purge valve and canister for proper operation.
6
Clear the error codes and conduct a drive cycle to see if the check engine light reactivates.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery negative terminal for safety.

2. Inspect and Replace EVAP Components

Step 1: Inspect the EVAP hoses and connections.
- Check for cracks or disconnections.
- Replace any damaged hoses.
Step 2: Test the EVAP purge valve.
- Disconnect the electrical connector and apply 12V power to the valve to see if it opens.
- If it does not open, replace the purge valve.
Step 3: Inspect the EVAP canister.
- Remove it from its mounting.
- Check for blockages or damage; replace if necessary.

3. Reconnect Battery and Clear Codes

Reconnect the battery terminal.
Use the OBD-II scanner to clear any stored codes in the ECU.
Perform a drive cycle to monitor for any reoccurrence of the check engine light.