why do my Ford F-150 interior lights stay on when doors are closed

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

443 words

Problem Statement

Learn how to diagnose and fix the issue of interior lights staying on in your Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or short circuits.

Symptoms

•Interior lights do not turn off after closing doors
•Dome light stays on while driving
•Battery drains when the vehicle is parked
•Warning chime may sound intermittently
•Electrical system may exhibit other irregularities

Diagnostic Steps

1
Inspect the door switches for proper function and alignment.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the interior lighting control module for faults.
4
Examine the wiring harness connected to the door switches for damage or corrosion.
5
Check the fuse related to the interior lighting system for continuity.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•OBD-II scanner
•Screwdriver set
•Socket set

Parts Required

•Door switch (if faulty)
•Interior lighting control module (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the door switches for proper function and alignment.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the interior lighting control module for faults.
4
Examine the wiring harness connected to the door switches for damage or corrosion.
5
Check the fuse related to the interior lighting system for continuity.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect Door Switches

Locate the door switches on each door.
Remove the switch from its housing by gently prying it out.
Use a multimeter to test for continuity when the switch is pressed and released.
- If the switch does not function properly, replace it with a new one.

3. Check Lighting Control Module

Locate the interior lighting control module (usually found in the fuse box or under the dashboard).
Disconnect the module and inspect for any visible damage or corrosion.
Reconnect the module and check for proper operation. If faulty, replace the module.

4. Inspect Wiring Harness

Examine the wiring harness leading to the door switches.
Look for any signs of fraying, corrosion, or disconnection.
Repair any damaged wires or replace the harness if necessary.

5. Test and Reconnect

Reconnect the negative battery terminal.
Test the interior lights by opening and closing the doors to ensure functionality.