what does code C0710 indicate for my Ford F-150 13th Generation

Ford F-150 13th Generation (2015-2020)

Error Codes

1-3 hours

Time

medium

Difficulty

high

Severity

Error Code: C0710

3 min read

469 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0710 steering angle sensor issues in Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0710

Affected Component

Steering

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is on a stable surface before performing repairs.

Symptoms

•Illuminated traction control warning light
•Illuminated stability control warning light
•Erratic steering response
•Steering wheel not centered
•Poor vehicle handling

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the C0710 code.
2
Inspect the wiring and connectors for the Steering Angle Sensor for any signs of damage or corrosion.
3
Check the Steering Angle Sensor alignment and calibration using a scan tool.
4
Test the SAS signal using a multimeter to ensure it’s within the manufacturer's specifications.
5
Clear the codes and perform a road test to see if the code reappears.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Torque wrench

Parts Required

•Steering Angle Sensor (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the C0710 code.
2
Inspect the wiring and connectors for the Steering Angle Sensor for any signs of damage or corrosion.
3
Check the Steering Angle Sensor alignment and calibration using a scan tool.
4
Test the SAS signal using a multimeter to ensure it’s within the manufacturer's specifications.
5
Clear the codes and perform a road test to see if the code reappears.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative terminal of the battery to prevent accidental electrical shorts.

2. Inspect Wiring and Connectors

Remove the steering column cover to access the SAS connectors.
Visually inspect the wiring harness for frays, breaks, or corrosion.
Repair or replace damaged wiring or connectors as necessary.

3. Remove and Replace Steering Angle Sensor

Disconnect the SAS connector.
Remove the screws securing the SAS to the steering column.
Carefully detach the old SAS and install the new one.
Reconnect the SAS connector and ensure it is securely seated.

4. Calibration of Steering Angle Sensor

Reconnect the negative battery terminal.
Start the vehicle and use the OBD-II scanner to access the SAS calibration function.
Follow the on-screen prompts to properly calibrate the sensor.

5. Final Checks

Reassemble any components removed for access.
Clear any fault codes from the system and conduct a test drive to ensure proper operation.
Verify the steering wheel position and ensure stability control systems are functioning correctly.