FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes my Ford F-150 13th Generation (2015-2020) to lose power while driving - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/what causes my Ford F-150 13th Generation (2015-2020) to lose power while driving

what causes my Ford F-150 13th Generation (2015-2020) to lose power while driving

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
579 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover the causes and solutions for loss of power while driving your Ford F-150 13th Generation. Step-by-step diagnostic and repair guide.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the hood or working on components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling or hesitation during acceleration
  • •Rough idle when the vehicle is stationary
  • •Poor fuel economy
  • •Noticeable decrease in throttle response
  • •Unusual engine noises (e.g., knocking or pinging)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrench set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Multimeter

Parts Required

  • •Fuel pump (if faulty)
  • •Fuel filter
  • •Air filter
  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Catalytic converter (if clogged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety during repairs.
  • Allow the engine to cool before starting any work.
2. Inspect and Replace Fuel Components

  • Fuel Pump:

    • Remove the fuel tank access cover (if applicable).
    • Disconnect the fuel lines and electrical connector from the pump.
    • Remove the pump assembly and inspect it for wear or failure.
    • Replace with a new fuel pump if necessary.

  • Fuel Filter:

    • Locate the fuel filter (often along the fuel line).
    • Use a wrench to disconnect the fuel lines from the filter.
    • Replace with a new fuel filter, ensuring proper orientation.
3. Check and Clean Air Intake
  • Remove the air intake duct and inspect the air filter for dirt and debris.
  • Replace the air filter if it is clogged.
  • Inspect the intake hoses for cracks or looseness; replace if necessary.
4. Inspect Ignition System
  • Remove the spark plugs using a spark plug socket.
  • Check for carbon deposits or wear; replace if necessary (recommended gap: .054 inches).
  • Inspect ignition coils for proper operation; replace any faulty coils.
5. Examine the Exhaust System
  • Inspect the exhaust for any visible damage or blockages.
  • Use a back pressure gauge to check for a clogged catalytic converter.
  • Replace the catalytic converter if backpressure exceeds manufacturer specifications.