FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford F-150 won’t go into reverse what's the problem - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/my Ford F-150 won’t go into reverse what's the problem

my Ford F-150 won’t go into reverse what's the problem

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
503 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix reverse gear issues in Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on the transmission to prevent burns.

Symptoms

  • •Gear shifter moves but transmission does not engage
  • •Grinding noise when attempting to shift into reverse
  • •Delay or hesitation before engaging in reverse
  • •Check engine light illuminated
  • •Fluid leaks under the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Drain pan
  • •Torque wrench

Parts Required

  • •Transmission fluid (specific to Ford specifications)
  • •Transmission filter (if applicable)
  • •Transmission solenoids (if faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Ensure the vehicle is on a level surface and secure it with wheel chocks.
  • Disconnect the battery to prevent any electrical shorts.
2. Check and Replace Transmission Fluid
  • Remove the transmission dipstick and check the fluid level.
  • If low, add the appropriate type of transmission fluid specified in the owner’s manual.
  • If the fluid is burnt or contaminated, proceed to drain and replace the fluid:
    1. Position a drain pan under the transmission pan.
    2. Remove the transmission pan bolts using a socket set.
    3. Carefully lower the pan and drain the old fluid.
    4. Replace the filter if applicable, ensuring to clean the pan and magnet.
    5. Reinstall the pan and torque bolts to manufacturer specifications.
3. Inspect and Adjust Transmission Linkage
  • Locate the transmission linkage assembly.
  • Check for wear or damage in the linkage components.
  • If misaligned, adjust the linkage according to the service manual.
  • Lubricate any pivot points to ensure smooth operation.
4. Test and Replace Transmission Solenoids (if necessary)
  • Access the transmission solenoids following the manufacturer’s service guidelines.
  • Disconnect electrical connectors and remove the solenoids.
  • Use a multimeter to check for continuity and resistance.
  • Replace any faulty solenoids with new units.