my Ford F-150 13th Generation (2015-2020) is consuming too much fuel, what should I check?

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

538 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive fuel consumption in Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before inspecting the intake system or fuel components.

Symptoms

•Decreased miles per gallon (MPG)
•Check engine light illuminated
•Rough idle and engine performance issues
•Strong smell of fuel
•Increased emissions from the exhaust
•Frequent need for refueling

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Check the fuel trim readings to assess if the engine is running too rich or too lean.
3
Inspect the air filter for clogs or excessive dirt that could impact airflow.
4
Examine fuel injectors for clogs or leaks that may cause improper fuel delivery.
5
Check tire pressure and overall vehicle condition to eliminate rolling resistance factors.
6
Inspect the mass airflow (MAF) sensor for proper operation and cleanliness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Fuel pressure gauge
•Cleaning supplies

Parts Required

•Air filter
•MAF sensor cleaner
•Fuel injectors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Check the fuel trim readings to assess if the engine is running too rich or too lean.
3
Inspect the air filter for clogs or excessive dirt that could impact airflow.
4
Examine fuel injectors for clogs or leaks that may cause improper fuel delivery.
5
Check tire pressure and overall vehicle condition to eliminate rolling resistance factors.
6
Inspect the mass airflow (MAF) sensor for proper operation and cleanliness.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, socket set, fuel pressure gauge, cleaning supplies.
Disconnect the negative battery terminal to prevent electrical shorts.
Ensure the vehicle is on a level surface and safely supported if necessary.

2. Clean or Replace Air Filter

Remove the air filter housing cover using a socket set.
Take out the air filter and inspect it for dirt and debris.
If dirty, clean it with compressed air or replace it with a new filter.
Reinstall the air filter and housing cover securely.

3. Inspect and Clean MAF Sensor

Locate the MAF sensor in the intake duct.
Disconnect the electrical connector and remove the sensor using the appropriate socket.
Clean the MAF sensor with MAF cleaner spray, ensuring not to touch the sensing element.
Reinstall the MAF sensor and reconnect the electrical connector.

4. Test Fuel Injectors

Use a fuel pressure gauge to test the fuel system's pressure.
If pressure is low, check the fuel pump and filter for issues.
Remove the fuel injectors and inspect for clogs or leaks.
Clean or replace injectors as necessary.

5. Check Tire Pressure and Condition

Use a tire pressure gauge to check each tire's pressure.
Inflate tires to the manufacturer's recommended PSI if low.
Inspect tires for uneven wear, replacing them if necessary.