FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford F-150 13th Generation (2015-2020) headlights keep flickering what causes this - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/my Ford F-150 13th Generation (2015-2020) headlights keep flickering what causes this

my Ford F-150 13th Generation (2015-2020) headlights keep flickering what causes this

Ford F-150 13th Generation (2015-2020)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
509 words

Problem Statement

Learn how to diagnose and fix flickering headlights on Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before inspecting electrical components.

Symptoms

  • •Headlights flickering intermittently
  • •Dimming of headlights when other electrical components are activated
  • •Possible dashboard warning lights illuminated
  • •Increased frequency of bulb burnout
  • •Flickering may worsen with engine speed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Wire brush
  • •Dielectric grease

Parts Required

  • •Headlight bulbs (if damaged)
  • •Electrical connectors (if corroded or damaged)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: multimeter, socket set, wire brush, dielectric grease.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Inspect and Replace Headlight Bulbs
  • Remove the headlight assembly:
    • Unscrew any retaining screws or clips.
    • Carefully pull the assembly out and disconnect the wiring harness.
  • Inspect the bulbs for any signs of damage or wear.
  • If necessary, replace the bulbs:
    • Install new bulbs (ensure they match the specifications).
    • Secure the bulbs in place and reconnect the wiring harness.
3. Check and Clean Electrical Connections
  • Inspect the headlight connector:
    • Look for corrosion or dirt accumulation.
    • Use a wire brush to clean the terminals.
  • Apply dielectric grease to the connections to prevent future corrosion.
  • Reconnect the headlight assembly firmly.
4. Test Battery and Alternator
  • Reconnect the negative battery terminal.
  • Using a multimeter, measure the battery voltage (should be around 12.6 volts when off).
  • Start the engine and check the voltage again (should be between 13.7 to 14.7 volts).
  • If the alternator is not within this range, consider replacing it.
5. Inspect Wiring Harness
  • Check the wiring harness leading to the headlights:
    • Look for any frayed or damaged wires.
    • Repair or replace any damaged sections of wiring as necessary.
  • Ensure that all connections are secure and free of corrosion.