FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford F-150 13th Generation (2015-2020) has a sudden drop in fuel economy - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/my Ford F-150 13th Generation (2015-2020) has a sudden drop in fuel economy

my Ford F-150 13th Generation (2015-2020) has a sudden drop in fuel economy

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
597 words

Problem Statement

Discover how to diagnose and resolve sudden drop in fuel economy for Ford F-150 13th Generation. Step-by-step guide with diagnostic and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Decreased acceleration response
  • •Unusual fuel odors
  • •Increased emissions from the exhaust
  • •Poor performance under load (e.g., towing)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Spark plug socket
  • •Fuel injector cleaning kit

Parts Required

  • •Air filter
  • •Fuel injectors
  • •Spark plugs

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
  • Allow the engine to cool before starting work on the vehicle.
2. Replace Air Filter
  • Remove the air filter housing cover using a socket set.
  • Take out the old air filter and inspect the housing for debris.
  • Install a new air filter, ensuring it fits snugly in the housing.
  • Reassemble the air filter housing cover and tighten screws to manufacturer specifications.
3. Clean or Replace Fuel Injectors
  • If cleaning, use a fuel injector cleaning kit to follow the manufacturer's instructions.
  • If replacement is required, disconnect the fuel lines and electrical connectors from the injectors.
  • Remove the old injectors using a socket set and install the new ones, ensuring they are properly seated.
  • Reconnect fuel lines and electrical connectors securely.
4. Replace Spark Plugs
  • Remove the ignition coil covers if applicable.
  • Disconnect the ignition coils from the spark plugs.
  • Use a spark plug socket to remove old spark plugs.
  • Inspect the spark plug gap and replace with new spark plugs at the recommended gap.
  • Reinstall the ignition coils and covers.
5. Test Fuel Pressure
  • Connect the fuel pressure gauge to the fuel rail service port.
  • Turn the ignition to the 'ON' position (without starting the engine) and check the fuel pressure reading.
  • If the reading is below manufacturer specifications, consider replacing the fuel pump.