my Ford F-150 13th Generation (2015-2020) ABS light is on, how can I reset it

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

502 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the ABS light on your Ford F-150 (2015-2020). Step-by-step guide with diagnostic steps, tools required, and safety tips.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system.
•Always use jack stands when working under the vehicle.

Symptoms

•ABS warning light illuminated on the dashboard
•Possible loss of ABS functionality during braking
•Brake pedal feels different (hard or soft)
•Increased stopping distance
•Potential traction control warning light illuminated

Diagnostic Steps

1
Scan the vehicle's onboard diagnostic system using an OBD-II scanner to check for any stored ABS fault codes.
2
Inspect the ABS fuse and relay for continuity and functionality.
3
Check the wheel speed sensors for proper connections and signs of damage.
4
Inspect the ABS control module for any visible damage or corrosion.
5
Verify brake fluid levels and inspect for leaks in the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Fuse puller
•Jack
•Jack stands

Parts Required

•Replacement ABS fuse (if necessary)
•Wheel speed sensors (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostic system using an OBD-II scanner to check for any stored ABS fault codes.
2
Inspect the ABS fuse and relay for continuity and functionality.
3
Check the wheel speed sensors for proper connections and signs of damage.
4
Inspect the ABS control module for any visible damage or corrosion.
5
Verify brake fluid levels and inspect for leaks in the braking system.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Components

Check ABS Fuse and Relay
- Locate the fuse box (usually under the dashboard or in the engine compartment).
- Use the fuse puller to inspect the ABS fuse and replace it if it is blown.
- Check the relay by swapping it with another relay of the same type and testing for functionality.
Inspect Wheel Speed Sensors
- Lift the vehicle using a jack and secure it with jack stands.
- Locate the wheel speed sensors on each wheel.
- Clean any debris or dirt from the sensors and their connectors.
- Test the sensors with a multimeter to ensure they are operating within specifications.
Check ABS Control Module
- Inspect the ABS control module for any visible signs of damage or corrosion.
- If necessary, disconnect the module and clean the contacts with electrical cleaner.
- Reconnect and secure the module properly.

3. Clear ABS Codes

Reconnect the battery.
Use the OBD-II scanner to clear any stored ABS fault codes from the system.

4. Test Drive

Take the vehicle for a test drive to confirm that the ABS light remains off and that the braking system functions correctly.