how to reset tire pressure monitoring system in Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

410 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) in a Ford F-150 (2015-2020). Step-by-step instructions and diagnostic tips included.

Affected Component

Electrical

Estimated Time

30 minutes

Important safety information - read before proceeding

•Ensure that the vehicle is parked on a level surface while checking tire pressures.

1
Check the current tire pressures with a tire pressure gauge to ensure they are at the recommended levels.
2
Verify that the TPMS sensors are functioning properly by using an OBD-II scanner to check for any related error codes.
3
Inspect each tire for damage or issues that might affect the TPMS.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Ensure all tires are inflated to the manufacturer's recommended pressure (found on the driver’s door jamb).
Gather necessary tools:
- OBD-II scanner (optional for diagnostics)
- Tire pressure gauge

2. Resetting the TPMS

Turn on the Ignition
- Insert the key fob and turn the ignition to the "ON" position but do not start the engine.
Access the TPMS Reset Menu
- Press the "Menu" button on the steering wheel control.
- Scroll through the options until you find "Settings."
- Select "Vehicle" then choose "Tire Pressure."
Initiate the Reset
- Select the option that says "Reset" or "Calibrate."
- Follow the on-screen prompts to confirm the reset.
Turn Off Ignition
- After confirming the reset, turn the ignition off.
Drive the Vehicle
- Drive the vehicle for about 10-15 minutes at speeds above 25 mph to allow the system to recalibrate and recognize the new tire pressures.