how to reset the transmission learning on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

30-60 minutes

Time

medium

Difficulty

medium

Severity

3 min read

406 words

Problem Statement

Learn how to reset the transmission learning on Ford F-150 (2015-2020) to improve shifting performance. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Transmission

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the engine is off before working on electrical systems.
•Disconnect the battery before making any electrical repairs or adjustments.

Symptoms

•Harsh or delayed shifts
•Erratic shifting behavior
•Slipping transmission
•Check engine light illuminated
•Reduced fuel efficiency

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port.
2
Check for any existing error codes related to the transmission.
3
Verify the transmission fluid level and condition.
4
Inspect the battery voltage and ensure it is within range (12.4V or higher).
5
Check for any TCM (Transmission Control Module) updates from the manufacturer.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Basic hand tools (socket set, wrenches)

Parts Required

•None specifically for the reset (ensure transmission fluid is at the proper level)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port.
2
Check for any existing error codes related to the transmission.
3
Verify the transmission fluid level and condition.
4
Inspect the battery voltage and ensure it is within range (12.4V or higher).
5
Check for any TCM (Transmission Control Module) updates from the manufacturer.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off all accessories and ensure the engine is off.
Disconnect the battery for at least 15 minutes to reset the TCM.

2. Battery Reconnection

Reconnect the negative battery terminal securely.
Ensure the positive terminal is also properly connected.

3. Transmission Learning Reset Process

Turn the ignition key to the "ON" position without starting the engine.
Wait for 10 seconds to allow the system to initialize.
Start the engine and allow it to idle for 3 minutes.
Shift through all gears (from Park to Drive and back) without exceeding 5 seconds in each gear.
Drive the vehicle at varying speeds for at least 10-15 minutes to allow the TCM to recalibrate.

4. Final Checks

After the learning reset, check for any error codes using the OBD-II scanner.
Clear any codes if they are present, ensuring the TCM is functioning correctly.