how to reset the tire pressure monitoring system on my Ford F-150

Ford F-150 13th Generation (2015-2020)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) on your Ford F-150. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure tires are properly inflated before resetting the TPMS to avoid driving on under-inflated tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating 'Check Tire Pressure'
•Changes in tire pressure after tire rotation or installation
•Recent tire replacement without TPMS reset

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure.
2
Check the TPMS light status; it should remain illuminated if there is an issue.
3
Confirm that the vehicle is in a stationary position with the ignition in the 'On' position but the engine off.
4
Review the vehicle's owner manual for specific reset instructions related to the model year.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the ignition is off.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure.
2
Check the TPMS light status; it should remain illuminated if there is an issue.
3
Confirm that the vehicle is in a stationary position with the ignition in the 'On' position but the engine off.
4
Review the vehicle's owner manual for specific reset instructions related to the model year.

Solution

1. Preparation

Tools Required: None required for reset.
Ensure the vehicle is parked on a level surface and the ignition is off.
Verify that all tires are inflated to the correct pressure as indicated on the driver’s side door jamb.

2. Resetting the TPMS

Turn on the Ignition:
- Insert the key into the ignition and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button:
- Depending on the model year, locate the TPMS reset button either under the steering column or near the fuse box.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS light in the instrument cluster blinks three times, then release the button.
Start the Engine:
- Start the engine and allow it to run for approximately 20 minutes. This allows the system to reset and recalibrate.
Check the TPMS Light:
- After the engine has run, check if the TPMS light is still illuminated. If it is off, the system has been successfully reset.

3. Recheck Tire Pressures

After resetting the TPMS, recheck the tire pressures to ensure all are at the correct specifications.