how to reset the tire pressure light on my Ford F-150?

Ford F-150 13th Generation (2015-2020)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

439 words

Problem Statement

Learn how to reset the tire pressure light on your Ford F-150. Step-by-step instructions and diagnostic tips for effective tire pressure management.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking tire pressures.
•Use caution when handling tire inflation equipment.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Tire pressure light flashing intermittently
•Possible rough ride due to low tire pressure

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inflate any under-inflated tires to the recommended pressure as specified on the driver’s side door jamb.
3
Ensure all tires, including the spare if equipped with a sensor, are properly inflated.
4
Inspect the TPMS sensors for any visible damage or corrosion.
5
Use an OBD-II scanner to check for any related error codes if the light remains on after resetting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor
•OBD-II scanner

Parts Required

•TPMS sensors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inflate any under-inflated tires to the recommended pressure as specified on the driver’s side door jamb.
3
Ensure all tires, including the spare if equipped with a sensor, are properly inflated.
4
Inspect the TPMS sensors for any visible damage or corrosion.
5
Use an OBD-II scanner to check for any related error codes if the light remains on after resetting.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, air compressor, and OBD-II scanner (if needed).
Ensure all tires are inflated to the manufacturer's recommended pressure.

2. Reset the TPMS

Turn the Ignition On: Insert the key and turn the ignition to the "On" position without starting the engine.
Locate the TPMS Reset Button: This is typically found beneath the steering column or inside the glove compartment. Consult the owner’s manual for exact location.
Press the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.
Turn Off the Ignition: Turn the ignition back to the "Off" position.
Start the Engine: Turn the ignition to "On" again and start the engine. The TPMS light should turn off if the reset was successful.

3. Verify Tire Pressure

After resetting, use the tire pressure gauge to check that all tires are at the recommended pressure.
If the light remains on, repeat the reset process or check for sensor malfunctions.