how to reset the oil change light on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

379 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2015-2020) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position with the engine off when performing this procedure.

Symptoms

•Oil change light is illuminated on the dashboard
•Maintenance reminder message displayed
•Potential confusion regarding oil change intervals

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the gas pedal inside the vehicle.
3
Press and release the gas pedal three times within 10 seconds.
4
Turn the ignition off and wait for a few seconds.
5
Start the engine to check if the oil change light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None (this procedure does not require replacement parts)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary items: vehicle key or key fob, and ensure the vehicle is parked on a level surface.
Ensure the vehicle is in "Park" mode for automatic transmissions or "Neutral" for manual transmissions.

2. Access Ignition Settings

Insert the key into the ignition or ensure the key fob is within range.
Turn the ignition to the "On" position (do not start the engine).

3. Reset the Oil Change Light

Press the Gas Pedal:
- Press the gas pedal down slowly and release it three times within 10 seconds. Ensure you are not pressing the brake pedal at the same time.

4. Turn Off Ignition

Turn the ignition key to the "Off" position.
Wait for approximately 10 seconds.

5. Verify Reset

Start the engine to confirm that the oil change light has been reset and is no longer illuminated.