FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on a Ford F-150 13th Generation (2015-2020) - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to reset the oil change light on a Ford F-150 13th Generation (2015-2020)

how to reset the oil change light on a Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
380 words

Problem Statement

Learn how to reset the oil change light on a Ford F-150 (2015-2020) with this step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and that the engine is off when performing the reset to avoid any accidental engagement.

Symptoms

  • •Oil change light illuminated on the dashboard
  • •Maintenance reminder displayed on the instrument panel
  • •Vehicle owner unable to clear the oil change notification

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Have the ignition key ready to access the vehicle's electrical system.
2. Access the Ignition
  • Insert the ignition key and turn it to the "On" position (do not start the engine).
  • Wait for the instrument panel lights to illuminate.
3. Reset the Oil Change Light
  • Locate the odometer button on the dashboard (usually near the speedometer).
  • Press and hold the odometer button for a few seconds.
  • Look for a message on the display that says "Oil Life Reset" or "Oil Change Reset."
  • Release the odometer button, and the display should revert to the odometer reading.
4. Verify the Reset
  • Turn off the ignition and then restart the vehicle.
  • Check the dashboard to ensure the oil change light is no longer illuminated.