FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Ford F-150 13th Generation (2015-2020) - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to reset the maintenance light on my Ford F-150 13th Generation (2015-2020)

how to reset the maintenance light on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
260 words

Problem Statement

Learn how to reset the maintenance light on your Ford F-150 13th Generation (2015-2020) with this easy step-by-step guide.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a flat surface while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible notifications for scheduled service
  • •Service reminders may appear when starting the engine

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ensure the vehicle is parked on a level surface, and the engine is off.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None
  • Ensure the vehicle is parked on a level surface, and the engine is off.
2. Accessing the Maintenance Light Reset
  1. Turn the ignition to the "On" position without starting the engine.
  2. Press the gas pedal three times within 10 seconds.
  3. Watch for the maintenance light to flash and turn off, indicating that the reset was successful.
3. Verification
  1. Turn the ignition off and then back on to check if the maintenance light remains off.
  2. Start the engine and confirm that no dashboard warning lights are illuminated.