how to reset the maintenance light on my Ford F-150 13th Generation

Ford F-150 13th Generation (2015-2020)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

374 words

Problem Statement

Learn how to reset the maintenance light on your Ford F-150 13th Generation. Step-by-step guide to clear maintenance reminders and ensure proper vehicle upkeep.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Engine oil change indicator may be displayed
•Tire rotation reminder may be active
•Service due notification appears

Diagnostic Steps

1
Turn the ignition off and ensure all doors are closed.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Check the dashboard for the 'Oil Change' or 'Service' light to see if it is illuminated.
5
Release the brake pedal and check if the maintenance light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition off and ensure all doors are closed.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Check the dashboard for the 'Oil Change' or 'Service' light to see if it is illuminated.
5
Release the brake pedal and check if the maintenance light has reset.

Solution

1. Preparation

Gather necessary tools such as the vehicle key.
Ensure the vehicle is in a safe location with the engine off.
Familiarize yourself with the dashboard layout.

2. Resetting the Maintenance Light

Turn Off the Ignition: Ensure the ignition is completely off and all doors are closed.
Press and Hold Brake Pedal: Press the brake pedal and keep it pressed down.
Turn Ignition to On Position: Without starting the engine, turn the ignition key to the "On" position. The dashboard lights should illuminate.
Watch for Maintenance Light: Observe the dashboard for the maintenance light; it may blink or remain solid.
Release Brake Pedal: After a few seconds, release the brake pedal while still observing the dashboard.
Confirm Reset: Turn the ignition off and then back to the "On" position to confirm that the maintenance light is no longer illuminated.