how to reset the brake system on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

462 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the brake system on Ford F-150 (2015-2020). Step-by-step guide with diagnostic steps, tools required, and safety warnings.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is secured on jack stands before working underneath.

Symptoms

•Brake warning light illuminated on the dashboard
•ABS light illuminated
•Changes in brake pedal feel or response
•Unusual noises when braking
•Warning message on the instrument cluster

Diagnostic Steps

1
Verify the reason for the reset requirement by checking for any stored error codes using an OBD-II scanner.
2
Inspect the brake fluid level and condition, ensuring it meets the manufacturer's specifications.
3
Check for any visible leaks in the brake lines or connections.
4
Confirm that all brake components (calipers, pads, rotors) are properly installed and functioning.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Brake fluid
•Socket set
•Torque wrench
•Jack
•Jack stands

Parts Required

•Brake fluid (specific to Ford specifications)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify the reason for the reset requirement by checking for any stored error codes using an OBD-II scanner.
2
Inspect the brake fluid level and condition, ensuring it meets the manufacturer's specifications.
3
Check for any visible leaks in the brake lines or connections.
4
Confirm that all brake components (calipers, pads, rotors) are properly installed and functioning.

Solution

1. Preparation

Tools Required: OBD-II scanner, brake fluid, socket set, torque wrench
Ensure the vehicle is parked on a flat surface, and the ignition is off.
Disconnect the negative battery terminal for safety.

2. Access the Brake System

Remove the wheel corresponding to the brake system you are resetting.
Use a jack and jack stands for safe lifting and support.

3. Reset the Electronic Brake Control Module (EBCM)

Reconnect the negative battery terminal.
Turn the ignition to the "ON" position without starting the engine.
Use the OBD-II scanner to access the EBCM settings.
Navigate to the brake system reset option and follow the on-screen instructions to reset the system.

4. Check and Refill Brake Fluid

Open the brake fluid reservoir cap.
Inspect the fluid level; if low, add the appropriate brake fluid type as specified in the owner's manual.
Replace the cap securely after checking.

5. Reassemble and Test

Reinstall the wheel and tighten the lug nuts to the manufacturer's torque specifications.
Lower the vehicle from the jack stands.
Start the engine and check for any warning lights on the dashboard.