how to reset the ABS light on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

429 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the ABS light on Ford F-150 13th Generation (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits or shocks

Symptoms

•ABS warning light illuminated on the dashboard
•Possible decrease in braking efficiency
•Increased stopping distance
•Traction control light may also be illuminated
•Occasional brake pedal pulsation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect ABS components for damage or corrosion
3
Check brake fluid level and top off if necessary
4
Test the ABS pump for proper voltage and continuity
5
Verify wheel speed sensors for proper function and resistance values

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Basic hand tools (socket set, screwdrivers)
•Brake fluid

Parts Required

•ABS sensors (if faulty)
•Wiring harness or connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shock while working.

2. Address Underlying Issues

Repair Faulty Components: Replace any damaged ABS sensors, wiring, or connectors identified during inspection.
Refill Brake Fluid: If low, refill using the manufacturer-recommended brake fluid type (DOT 3 or DOT 4).

3. Reset the ABS Light

Reconnect Battery: Reconnect the negative battery terminal securely.
Turn Ignition On: Insert the key and turn the ignition to the "ON" position (do not start the engine).
Press Brake Pedal: Depress the brake pedal slowly three times.
Cycle Ignition: Turn the ignition off and back on again.
Check ABS Light: Observe the dashboard to see if the ABS light has turned off. If it remains on, repeat the process or check for additional faults.