how to reset Ford F-150 13th Generation steering assist light

Ford F-150 13th Generation (2015-2020)

Error Codes

1 hour

Time

medium

Difficulty

high

Severity

3 min read

448 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the steering assist light on your Ford F-150 13th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always allow the engine to cool before performing maintenance tasks.

Symptoms

•Steering assist light illuminated on the dashboard
•Difficulty steering the vehicle (heavy steering)
•Intermittent loss of power steering assist
•Unusual noises when turning the steering wheel
•Error codes related to power steering in the OBD-II system

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes using a compatible scanner.
2
Inspect the power steering fluid level and condition in the reservoir.
3
Check for any visible leaks in the power steering hoses and connections.
4
Test the power steering pump for proper operation and noise.
5
Verify the condition of the steering rack and any related components.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench

Parts Required

•Power steering fluid (as needed)
•Replacement hoses or components (if leaks or damage are found)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes using a compatible scanner.
2
Inspect the power steering fluid level and condition in the reservoir.
3
Check for any visible leaks in the power steering hoses and connections.
4
Test the power steering pump for proper operation and noise.
5
Verify the condition of the steering rack and any related components.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the negative battery terminal to reset the system.

2. Check Fluid Levels

Inspect the power steering fluid reservoir.
- If low, add the appropriate type of power steering fluid (consult the owner's manual).
- If fluid is discolored or contaminated, consider flushing the system.

3. Clear Error Codes

Reconnect the negative battery terminal after waiting for about 10 minutes.
Use the OBD-II scanner to clear any existing power steering error codes.
Turn the ignition to the 'ON' position without starting the engine.

4. Test Power Steering

Start the engine and turn the steering wheel from lock to lock.
Monitor for any unusual noises or resistance, indicating that the power steering system is functioning correctly.

5. Final Inspection

Recheck the steering assist light status. If it remains illuminated, further diagnostics may be necessary to address any underlying issues.