FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the traction control light on my Ford F-150 13th Generation (2015-2020) - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to fix the traction control light on my Ford F-150 13th Generation (2015-2020)

how to fix the traction control light on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
498 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in your Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool down before inspecting brake components.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Reduced engine power during acceleration
  • •Unusual wheel slip during acceleration
  • •Warning messages displayed on the dashboard
  • •Possible rough idling or stalling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Torque wrench

Parts Required

  • •Wheel speed sensors (if damaged)
  • •Traction control switch (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Scan and Clear Codes
  • Use an OBD-II scanner to read and clear any diagnostic trouble codes (DTCs).
  • Note down any persistent codes for further investigation.
3. Inspect Wheel Speed Sensors
  • Locate the wheel speed sensors at each wheel.
  • Disconnect the electrical connectors and inspect for dirt or damage.
  • Clean the sensors with a cloth and reconnect.
  • If any sensor appears damaged, replace it with a new one.
4. Check ABS System
  • Inspect the ABS module for any signs of leaks or damage.
  • If error codes indicate ABS issues, further diagnostics may be needed.
  • Replace any faulty ABS components as necessary.
5. Test Traction Control Switch
  • Locate the traction control switch on the dashboard.
  • Remove the switch from the dashboard and test it for continuity using a multimeter.
  • Replace the switch if it fails the continuity test.
6. Reconnect Battery and Test Drive
  • Reconnect the battery terminals securely.
  • Start the vehicle and take it for a test drive to ensure the traction control system operates correctly.