how to fix the rearview camera on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

460 words

Problem Statement

Learn how to diagnose and fix rearview camera issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

•Blank screen when the vehicle is in reverse
•Distorted or fuzzy images displayed
•Error message on the infotainment system related to the camera
•Camera activation delay
•Inconsistent functionality (works intermittently)

Diagnostic Steps

1
Inspect the rearview camera lens for physical damage or dirt.
2
Check connections and wiring at the rear camera and the infotainment system.
3
Scan the vehicle’s computer for any error codes related to the camera system using an OBD-II scanner.
4
Verify that the vehicle's battery voltage is within normal operating range.
5
Test the camera with a multimeter to ensure proper voltage is being supplied.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torx screwdriver
•Trim removal tool

Parts Required

•Replacement rearview camera (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rearview camera lens for physical damage or dirt.
2
Check connections and wiring at the rear camera and the infotainment system.
3
Scan the vehicle’s computer for any error codes related to the camera system using an OBD-II scanner.
4
Verify that the vehicle's battery voltage is within normal operating range.
5
Test the camera with a multimeter to ensure proper voltage is being supplied.

Solution

1. Preparation

Gather tools and parts.
Disconnect the vehicle's battery to ensure safety while working on the electrical system.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Torx screwdriver
Trim removal tool

2. Inspect and Clean the Camera

Sub-steps:
1. Locate the rearview camera, which is typically mounted in the tailgate handle or above the license plate.
2. Use the trim removal tool to carefully detach any surrounding trim without damaging it.
3. Clean the camera lens with a microfiber cloth and water; ensure there are no obstructions.

3. Check Connections

Sub-steps:
1. Examine the wiring harness connected to the camera for signs of wear or damage.
2. Ensure the connector is secure; if loose, reconnect it firmly.
3. If necessary, use a multimeter to check for continuity in the wiring.

4. Replace the Camera (if necessary)

Sub-steps:
1. If the camera is faulty, remove the old camera by unscrewing it from its mount.
2. Install the new camera by securing it in place.
3. Reconnect the wiring harness to the new camera.

Parts Required:

Replacement rearview camera (if faulty)

5. Reassemble and Test

Sub-steps:
1. Reattach any trim pieces removed during the process.
2. Reconnect the vehicle's battery.
3. Start the vehicle and shift into reverse to check if the camera functions correctly.