FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the rear window not functioning in my Ford F-150 13th Generation (2015-2020) - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to fix the rear window not functioning in my Ford F-150 13th Generation (2015-2020)

how to fix the rear window not functioning in my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
510 words

Problem Statement

Learn how to diagnose and fix the rear window not functioning in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent shock.
  • •Allow the vehicle to cool before working on any components to avoid burns.

Symptoms

  • •Rear window does not respond to switch inputs
  • •No sound of the window motor operating
  • •Window may be stuck in the closed or open position
  • •Possible blown fuse related to the window system
  • •Rear window switch feels loose or unresponsive

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Screwdriver set
  • •Multimeter
  • •Wire strippers
  • •Electrical tape
  • •Replacement window motor
  • •Replacement switch

Parts Required

  • •Fuse
  • •Window motor
  • •Window switch

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: screwdriver set, multimeter, wire strippers, electrical tape, and a replacement motor or switch if needed.
  • Disconnect the vehicle battery to prevent electrical shock.
2. Inspect and Replace the Fuse
  • Locate the fuse box and identify the rear window fuse using the diagram.
  • Remove the fuse and test it for continuity with a multimeter.
  • If blown, replace it with a fuse of the same rating (usually 15A).
3. Access the Rear Window Switch
  • Remove the door panel using a screwdriver and trim tools to access the rear window switch.
  • Disconnect the wiring harness from the switch.
  • Test the switch for continuity using a multimeter; replace if defective.
4. Test and Replace the Window Motor
  • If the switch is functional, locate the window motor inside the door.
  • Disconnect the motor connector and apply direct battery voltage to the motor terminals.
  • If the motor does not operate, it will need to be replaced.
  • To replace, remove the motor by unscrewing it from the regulator assembly and install the new motor.
5. Reassemble and Test
  • Reconnect all wiring harnesses and secure the door panel back in place.
  • Reconnect the battery and test the rear window operation.
  • Ensure all components are functioning properly before finalizing the repair.