how to fix the rear view camera on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

Learn how to diagnose and fix the rear view camera issues in Ford F-150 13th Generation (2015-2020). Step-by-step guide with tools and safety tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before handling any components.

Symptoms

•Camera feed is blank or flickering
•Camera Not Available message displayed on the screen
•Poor image quality or distortion
•Backup sensors not functioning correctly
•Check camera system warning light illuminated

Diagnostic Steps

1
Inspect the camera lens for physical damage or obstructions.
2
Check the wiring harness and connectors for signs of corrosion or damage.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the camera’s power supply using a multimeter to measure voltage at the connector.
5
Test the camera with a compatible diagnostic tool to confirm functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Trim removal tool
•Socket set

Parts Required

•Replacement rear view camera

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for physical damage or obstructions.
2
Check the wiring harness and connectors for signs of corrosion or damage.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the camera’s power supply using a multimeter to measure voltage at the connector.
5
Test the camera with a compatible diagnostic tool to confirm functionality.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to prevent electrical shorts.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Inspect and Clean Camera

Remove any debris or dirt from the camera lens using a soft cloth.
If the lens is cracked or damaged, proceed to replace the camera.

3. Access the Camera Assembly

Remove the tailgate trim panel using a trim removal tool.
- Tools Required: Trim removal tool, socket set
Disconnect the wiring harness from the camera.

4. Replace the Camera (if necessary)

Remove the screws securing the camera assembly to the tailgate.
Carefully detach the old camera from the mounting bracket.
Install the new camera by reversing the removal process.
- Parts Required: Replacement rear view camera

5. Reconnect Wiring and Reassemble

Reconnect the wiring harness to the new camera.
Reinstall the tailgate trim panel, ensuring all clips are secure.
Reconnect the battery.