how to fix the power window issue in my Ford F-150 13th Generation (2015-2020)?

Ford F-150 13th Generation (2015-2020)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

479 words

Problem Statement

Learn how to diagnose and fix power window issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits.

Symptoms

•Power windows do not respond when the switch is pressed
•Windows may operate intermittently or only from one switch
•Unusual noises when attempting to operate the windows
•Windows get stuck in the closed or open position
•Warning lights related to electrical issues on the dashboard

Diagnostic Steps

1
Inspect the power window switch for visible damage or wear.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the power window motor by applying direct voltage to the terminals.
4
Check the window regulator for mechanical binding or failure.
5
Inspect fuses related to the power window system in the fuse box.
6
Examine wiring harnesses for any signs of damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Phillips screwdriver
•Trim removal tool
•Multimeter
•Wire stripper/crimper

Parts Required

•Power window switch (if faulty)
•Power window motor (if faulty)
•Window regulator (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power window switch for visible damage or wear.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the power window motor by applying direct voltage to the terminals.
4
Check the window regulator for mechanical binding or failure.
5
Inspect fuses related to the power window system in the fuse box.
6
Examine wiring harnesses for any signs of damage or corrosion.

Solution

1. Preparation

Gather the necessary tools and parts.
Disconnect the negative battery terminal to ensure safety.

2. Remove Door Panel

Use a Phillips screwdriver to remove screws securing the door panel.
Carefully pry off the door panel using a trim removal tool, disconnecting any clips.
Disconnect wiring harnesses from the door panel.

3. Inspect and Replace Components

Inspect the Window Switch:
- Remove the switch from the door panel.
- Test the switch with a multimeter for continuity. Replace if faulty.
Inspect the Window Motor:
- Disconnect the motor connector and test directly with a power source.
- If the motor does not operate, replace it with a new unit.
Inspect the Window Regulator:
- Check for any binding or broken components.
- Replace the regulator if it shows signs of mechanical failure.

4. Reinstall Components

Reattach the window motor and regulator securely following manufacturer specifications.
Reconnect the window switch and ensure all wiring is properly secured.
Replace the door panel, ensuring all clips are engaged and screws are tightened.

5. Final Steps

Reconnect the negative battery terminal.
Test the power windows to ensure proper operation.