how to fix stalling issues in Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

549 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix stalling issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical systems to prevent shocks.
•Allow the engine to cool before handling components in the engine bay to avoid burns.

Symptoms

•Engine stalls unexpectedly during idle
•Engine stalls while driving at low speeds
•Difficulty restarting the engine after stalling
•Rough idle when the engine is running
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the fuel system for proper fuel pressure using a fuel pressure gauge.
3
Check the air intake system for obstructions or leaks.
4
Examine the throttle body for carbon buildup or malfunctions.
5
Test the ignition system components, including spark plugs and coils, for proper function.
6
Inspect the battery and charging system to ensure adequate voltage during operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Throttle body cleaner
•Multimeter
•Socket set

Parts Required

•Fuel pump (if found defective)
•Throttle body gasket (if replacing throttle body)
•Spark plugs
•Ignition coils (if found defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the fuel system for proper fuel pressure using a fuel pressure gauge.
3
Check the air intake system for obstructions or leaks.
4
Examine the throttle body for carbon buildup or malfunctions.
5
Test the ignition system components, including spark plugs and coils, for proper function.
6
Inspect the battery and charging system to ensure adequate voltage during operation.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the negative battery terminal to avoid electrical shorts.
Ensure the vehicle is parked on a level surface and the engine is cool.

2. Address Fuel Delivery Issues

Sub-step 1: Locate the fuel pump relay and check its function. Replace it if faulty.
Sub-step 2: Remove the fuel line from the fuel rail and connect a fuel pressure gauge. Turn the ignition to the "On" position (do not start) and check for proper fuel pressure (typically 30-50 psi).
Sub-step 3: If pressure is low, replace the fuel pump.

3. Clean or Replace Throttle Body

Sub-step 1: Remove the air intake duct to access the throttle body.
Sub-step 2: Disconnect the throttle position sensor and any electrical connectors.
Sub-step 3: Using throttle body cleaner, thoroughly clean the interior surfaces of the throttle body. If excessively worn or damaged, replace the throttle body.

4. Inspect and Replace Ignition Components

Sub-step 1: Remove the ignition coils and inspect for cracks or carbon tracking.
Sub-step 2: Replace any damaged ignition coils and check spark plugs for wear. Replace plugs if they show signs of fouling or excessive wear.

5. Check Battery and Charging System

Sub-step 1: Use a multimeter to check the battery voltage; it should read around 12.6 volts when off and about 14.4 volts when running.
Sub-step 2: If the voltage is low, replace the battery or alternator as necessary.