how to fix P0700 transmission code Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission code in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before checking the transmission fluid to avoid burns.

Symptoms

•Check engine light illuminated
•Erratic shifting or inability to shift gears
•Transmission slipping or harsh engagement
•Poor acceleration or loss of power during driving
•Transmission overheating
•Delayed engagement when shifting from park to drive

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine the wiring and connectors leading to the TCM for signs of wear, corrosion, or damage.
4
Test the TCM for proper operation and communication with the engine control module (ECM).
5
Check for any recent repairs or modifications that may have affected the transmission system.
6
Inspect the transmission solenoids for functionality and resistance values.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump

Parts Required

•Transmission control module (if replacement is necessary)
•Transmission solenoids (if replacement is necessary)
•Transmission fluid (Mercon ULV)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine the wiring and connectors leading to the TCM for signs of wear, corrosion, or damage.
4
Test the TCM for proper operation and communication with the engine control module (ECM).
5
Check for any recent repairs or modifications that may have affected the transmission system.
6
Inspect the transmission solenoids for functionality and resistance values.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety while working on the vehicle.
Ensure the vehicle is on a level surface and properly supported with jack stands.

2. Transmission Fluid Check and Replacement

Tools Needed: Transmission fluid pump, socket set, torque wrench.
Remove the transmission fluid dipstick and check the fluid level.
If fluid is low or dirty, drain the transmission fluid using the drain plug.
Replace the fluid with the manufacturer-recommended transmission fluid (e.g., Mercon ULV).
Refill the transmission with the correct amount of fluid as per the service manual.

3. Inspect and Replace the TCM

Tools Needed: Socket set, torque wrench, electrical connectors.
Locate the TCM, typically found near the transmission or under the dashboard.
Disconnect the TCM wiring harness carefully.
Remove the mounting bolts securing the TCM and take it out.
Replace with a new or reconditioned TCM, ensuring it is compatible with the vehicle model.
Reconnect the wiring harness securely and torque the bolts to the manufacturer’s specifications.

4. Inspect and Replace Transmission Solenoids (if necessary)

Tools Needed: Socket set, torque wrench.
Access the transmission solenoids by removing the transmission pan.
Inspect the solenoids for damage or failure and replace if necessary.
Reinstall the transmission pan with a new gasket, and torque bolts to manufacturer specifications.

5. Reconnect Battery and Clear Codes

Reconnect the negative battery terminal.
Use the OBD-II scanner to clear the P0700 and any additional codes.
Perform a test drive to ensure that the issue has been resolved.