FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Ford F-150 13th Generation (2015-2020) making a rattling noise when idling - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to fix my Ford F-150 13th Generation (2015-2020) making a rattling noise when idling

how to fix my Ford F-150 13th Generation (2015-2020) making a rattling noise when idling

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
464 words

Problem Statement

Learn how to diagnose and fix rattling noise at idle in Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before inspecting or working in the engine bay.

Symptoms

  • •Rattling noise from the engine compartment
  • •Noise increases with engine RPM
  • •Possible engine misfire or rough idle
  • •Loss of power during acceleration
  • •Increased vibrations felt in the cabin

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdrivers
  • •Safety gloves

Parts Required

  • •Engine mounts (if damaged)
  • •Serpentine belt (if worn)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all tools and parts required.
  • Ensure the engine is cool and the vehicle is parked on a level surface.
  • Disconnect the battery to prevent electrical issues.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Screwdrivers
  • Safety gloves
2. Inspect and Tighten Components
  • Sub-steps:
    1. Inspect the engine cover and heat shields for tightness. Use a socket set to tighten any loose bolts.
    2. Check the exhaust system for loose fittings or broken mounts. Tighten or replace as necessary.
    3. Look for any loose brackets or supports in the engine bay and secure them.
3. Check Engine Mounts
  • Sub-steps:
    1. Visually inspect engine mounts for cracks or separation.
    2. If damaged, remove the old mounts using a socket set and install new ones, ensuring they are torqued to manufacturer specifications.
4. Inspect Serpentine Belt and Pulleys
  • Sub-steps:
    1. Remove the serpentine belt tensioner using a socket to relieve tension and take off the belt.
    2. Inspect the belt for fraying or cracks; replace if necessary.
    3. Check the pulleys for smooth operation and replace any that are damaged or worn.