how to deal with C0035 code on Ford F-150 13th Generation (2015-2020)

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery to ensure safety while working on electrical systems.

2. Inspect and Replace Wheel Speed Sensor

1. Remove the Wheel:

   • Use a lug wrench to loosen and remove the lug nuts.
   • Safely lift the vehicle using a jack and secure it with jack stands.
   • Remove the left front wheel.

2. Access the Wheel Speed Sensor:

   • Locate the left front wheel speed sensor mounted on the wheel hub.
   • Disconnect the sensor's electrical connector.

3. Remove the Old Sensor:

   • Use a socket set to remove the retaining bolt securing the wheel speed sensor.
   • Pull the sensor out of the hub assembly carefully.

4. Install the New Sensor:

   • Apply a small amount of anti-seize compound to the new sensor's threads (if applicable).
   • Insert the new wheel speed sensor into the hub assembly.
   • Secure it with the retaining bolt and tighten it to the manufacturer's torque specification (usually around 10-15 ft-lbs).

5. Reconnect the Electrical Connector:

   • Plug the electrical connector back into the new sensor ensuring a secure connection.

3. Reassemble and Test

1. Reinstall the Wheel:

   • Place the wheel back onto the hub and hand-tighten the lug nuts.
   • Lower the vehicle and torque the lug nuts to the manufacturer's specifications (typically 100-140 ft-lbs).

2. Reconnect the Battery:

   • Reconnect the battery terminal and ensure it is secure.

3. Clear the Codes:

   • Use the OBD-II scanner to clear the C0035 code from the vehicle's computer.

4. Test Drive:

   • Take the vehicle for a test drive to ensure that the ABS and traction control systems are functioning correctly and that the warning lights have turned off.