FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to check the blower motor on my Ford F-150 13th Generation (2015-2020) - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to check the blower motor on my Ford F-150 13th Generation (2015-2020)

how to check the blower motor on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
566 words

Problem Statement

Learn how to check the blower motor functionality in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before starting any electrical work to prevent shocks or shorts.

Symptoms

  • •No air blowing from the vents
  • •Intermittent operation of the blower motor
  • •Blower motor running at a constant speed regardless of setting
  • •Unusual noises from the blower motor area
  • •Blower motor only functioning on certain speed settings

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Torx screwdriver set
  • •Multimeter
  • •Wire connectors

Parts Required

  • •Blower motor fuse (if blown)
  • •Blower motor resistor (if faulty)
  • •Blower motor (if necessary)

Additional Information

Affected Component
HVAC
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required:
    • Flathead screwdriver
    • Torx screwdriver set
    • Multimeter
    • Wire connectors (if needed)
  • Disconnect the negative battery terminal to ensure safety during the repair.
2. Check the Fuse
  • Locate the fuse box, typically found under the dashboard or in the engine compartment.
  • Use the fuse diagram to identify the blower motor fuse.
  • Remove the fuse and inspect it for continuity using a multimeter.
    • If blown, replace it with a new fuse of the same amperage.
3. Inspect the Blower Motor Resistor
  • Locate the blower motor resistor, usually found near the blower motor under the dashboard.
  • Remove the connector from the resistor and visually inspect for damage.
  • Use a multimeter to test the resistance across terminals as specified in the service manual.
    • Replace the resistor if it shows no continuity or abnormal readings.
4. Test the Blower Motor
  • Locate the blower motor, usually under the passenger side dashboard.
  • Disconnect the wiring harness from the blower motor.
  • Use jumper wires to connect the motor directly to a 12V power source.
    • If the motor operates, it is functioning properly; if not, it may need replacement.
5. Check Wiring and Connectors
  • Inspect the wiring harness and connectors for any signs of wear, corrosion, or loose connections.
  • Repair or replace any damaged wiring or connectors as necessary.
6. Reassemble and Test
  • Reconnect all components and connectors.
  • Reattach the battery terminal.
  • Start the vehicle and turn on the HVAC system to test the blower motor functionality.