how do I reset the oil change light on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

405 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2015-2020) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Notification for oil change due displayed on the instrument cluster
•Potential annoyance from alerting reminders
•Vehicle may not indicate actual oil life remaining

Diagnostic Steps

1
Turn the ignition off completely.
2
Press and hold the gas pedal all the way down.
3
Turn the ignition to the 'On' position without starting the engine while continuing to hold the gas pedal.
4
Wait for the oil change light to flash and then turn off.
5
Release the gas pedal.
6
Turn the ignition off and then start the engine to verify the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition off completely.
2
Press and hold the gas pedal all the way down.
3
Turn the ignition to the 'On' position without starting the engine while continuing to hold the gas pedal.
4
Wait for the oil change light to flash and then turn off.
5
Release the gas pedal.
6
Turn the ignition off and then start the engine to verify the reset.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather necessary tools (if any) like the owner's manual for reference.

2. Resetting the Oil Change Light

Turn Off Ignition:
- Make sure the vehicle is completely off.
Press Gas Pedal:
- Firmly press the gas pedal to the floor and hold it down.
Turn Ignition On:
- While holding the gas pedal, turn the ignition key to the "On" position without starting the engine.
Wait for Light to Flash:
- Keep holding the gas pedal until the oil change light flashes. This indicates that the system is resetting.
Release Gas Pedal:
- Once the light has flashed, release the gas pedal.
Turn Off Ignition:
- Turn the ignition off completely.
Start Engine:
- Start the engine to confirm that the oil change light has been reset and is no longer illuminated.