FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to resolve tire pressure monitoring system errors on Ford F-150 12th Generation (2009-2014) - Ford F-150
Home/Cars/Ford/F-150/12th Generation (2009-2014)/how to resolve tire pressure monitoring system errors on Ford F-150 12th Generation (2009-2014)

how to resolve tire pressure monitoring system errors on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
519 words

Problem Statement

Learn how to resolve TPMS errors on Ford F-150 (2009-2014). Step-by-step guide with diagnostic steps, tools required, and effective solutions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always wear safety glasses when working on tires.
  • •Ensure the vehicle is properly secured on jack stands if lifting is necessary.

Symptoms

  • •TPMS warning light illuminated on the dashboard
  • •Inaccurate tire pressure readings
  • •Warning message displayed on the information screen
  • •Difficulty resetting the TPMS after tire maintenance
  • •Sudden drop in tire pressure detected

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Tire pressure gauge
  • •Basic hand tools (sockets, wrench set)
  • •TPMS reset tool (if necessary)

Parts Required

  • •TPMS sensors (if faulty)
  • •TPMS sensor batteries (if applicable)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed.
  • Ensure the vehicle is parked on a flat, stable surface.
  • Turn off the ignition and remove the key.
2. Check Tire Pressures
  • Using a tire pressure gauge, check the pressure of all four tires.
  • Inflate or deflate tires to meet the recommended pressure specified on the driver’s side door jamb.
3. Inspect TPMS Sensors
  • Remove the tire from the wheel if necessary to access the TPMS sensor.
  • Inspect the sensor for damage or corrosion on the terminals.
  • Replace the sensor battery if it is dead or weak.
  • Consider replacing the entire TPMS sensor if it is faulty.
4. Reset the TPMS
  • Turn the ignition key to the "ON" position without starting the engine.
  • Press the TPMS reset button (usually located beneath the steering column) until the TPMS light blinks three times, then release the button.
  • Drive the vehicle for at least 10 minutes at speeds above 50 mph to allow the system to recalibrate.
5. Test and Verify
  • After the reset, monitor the TPMS light to ensure it remains off.
  • Drive the vehicle and check the tire pressures again to ensure accurate readings.