how to reset the tire pressure light on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

416 words

Problem Statement

Learn how to reset the tire pressure light on Ford F-150 12th Generation (2009-2014). Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a level surface before performing the reset.

Symptoms

•Tire pressure light illuminated on the dashboard
•Inconsistent tire pressure readings on the display
•Warning message indicating low tire pressure
•Possible rough ride if tire pressures are significantly off

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure levels as specified on the driver's door jamb.
2
Inspect each tire for signs of damage or punctures that may cause air loss.
3
Check the TPMS sensors for any visible damage or corrosion, particularly the valve stems.
4
Use an OBD-II scanner to check for any TPMS-related error codes that may indicate further issues.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for resetting
•Tire pressure gauge (recommended)

Parts Required

•TPMS sensors (if damaged and need replacement)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure levels as specified on the driver's door jamb.
2
Inspect each tire for signs of damage or punctures that may cause air loss.
3
Check the TPMS sensors for any visible damage or corrosion, particularly the valve stems.
4
Use an OBD-II scanner to check for any TPMS-related error codes that may indicate further issues.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn the ignition to the "On" position without starting the engine.

2. Reset the TPMS

Locate the TPMS Reset Button:
- The TPMS reset button is usually found beneath the steering column or near the driver's side footwell.
Press and Hold the Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times and then remains on.
Start the Engine:
- Turn the ignition key to the "Start" position to start the engine.
Wait for the Light to Turn Off:
- Drive the vehicle for approximately 20 minutes at speeds above 50 mph. The TPMS light should turn off once the system has successfully reset.

3. Check Tire Pressure Again

After the TPMS light turns off, verify that all tire pressures are still at the recommended levels.