how to reset the oil change light on my Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

308 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 12th Generation (2009-2014) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•Engine oil change performed recently

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Insert the key into the ignition, but do not start the engine.
3
Press the accelerator pedal three times within 10 seconds.
4
Turn the ignition off and then back on to check if the light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Have the vehicle's key or key fob ready.

2. Access the Ignition

Insert the key into the ignition switch.
Ensure the vehicle is in the "OFF" position.

3. Reset the Oil Change Light

Turn the ignition to the "ON" position without starting the engine.
Quickly press the accelerator pedal three times within 10 seconds.
Turn the ignition back to the "OFF" position.

4. Verify the Reset

Turn the ignition back to the "ON" position again.
Check the dashboard to ensure the oil change light is no longer illuminated.