FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on Ford F-150 12th Generation (2009-2014) - Ford F-150
Home/Cars/Ford/F-150/12th Generation (2009-2014)/how to reset the oil change light on Ford F-150 12th Generation (2009-2014)

how to reset the oil change light on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
362 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 12th Generation (2009-2014) with this step-by-step guide. Ensure proper maintenance tracking.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

  • •Oil change light remains illuminated after an oil change
  • •Maintenance reminders do not reset
  • •Engine oil level and quality are acceptable, but light persists

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools: No special tools are required for the reset.
  • Confirm that the oil change has been completed before proceeding.
2. Reset Oil Change Light

  1. Ignition Position:

    • Turn the ignition key to the "ON" position (do not start the engine).

  2. Press Gas Pedal:

    • Fully press and release the gas pedal three times within five seconds. This step may need to be repeated if the light does not turn off.

  3. Turn Off Ignition:

    • Turn the ignition switch to the "OFF" position.

  4. Turn On Ignition:

    • Turn the ignition switch back to the "ON" position again.

  5. Verify Reset:

    • Check if the oil change light has turned off. If not, repeat the above steps.