how to reset the oil change light on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

420 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 (2009-2014). Step-by-step guide with diagnostic steps and verification procedures.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe condition to perform the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder notification appears on the display
•Potential confusion about the oil change status

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Verify that the oil change has been performed and the new oil filter has been installed correctly.
3
Check for additional warning lights that may indicate other service requirements.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Make sure the vehicle is parked on a level surface.
Ensure the vehicle is in "Park" (for automatic transmissions) or in neutral (for manual transmissions).

2. Turn On the Ignition

Insert the key into the ignition or ensure the push-button start is ready.
Turn the ignition to the "On" position without starting the engine. For push-button start, press the button twice without pressing the brake pedal.

Use the "Gas" or "Brake" pedal to scroll through the menu options on the dashboard display.
Press the "Setup" button on the steering wheel or use the buttons on the dashboard to navigate to "Oil Life" or "Settings."

4. Reset the Oil Life

Once the "Oil Life" option is highlighted, press and hold the "OK" button on the steering wheel until the display shows "Oil Life Reset."
Confirm that the oil life percentage resets to 100%.

5. Turn Off the Ignition

Turn the ignition key to the "Off" position or press the push-button start to turn off the vehicle.
Wait a few seconds before restarting the vehicle to confirm that the oil change light is no longer illuminated.