how to reset the oil change light on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

319 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 12th Generation (2009-2014) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing the reset procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance required message displayed
•Engine oil change due reminder

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the accelerator pedal three times within 10 seconds.
4
Turn the ignition key to the 'OFF' position.
5
Start the engine and verify that the oil change light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the accelerator pedal three times within 10 seconds.
4
Turn the ignition key to the 'OFF' position.
5
Start the engine and verify that the oil change light has turned off.

Solution

1. Preparation

Gather necessary tools: Ignition key, and ensure the vehicle is in park or neutral.
Sit inside the vehicle with the doors closed.

2. Turn Ignition On

Insert the ignition key and turn it to the "ON" position without starting the engine.
Ensure all dashboard lights illuminate.

3. Reset Oil Change Light

Quickly press the accelerator pedal three times in succession.
Make sure to do this within a 10-second window.

4. Turn Ignition Off

Turn the ignition key to the "OFF" position after pressing the accelerator pedal.

5. Start the Engine

Start the engine to check if the oil change light has been successfully reset.